AlienVault SIEM – Playing with the big boys!!!

AlienVault Logo

At Infosecnirvana, we did a post on SIEM Comparison – 101 and a lot of readers where interested in evaluating AlienVault SIEM and how it stacks up against the Usual suspects like ArcSight, QRadar, McAfee Nitro, Splunk etc. Well, we listened and this post is about our take on AlienVault SIEM, its strengths, weakness and many more.

Introduction:

AlienVault is the enterprise avatar of Open Source SIM (OSSIM). AlienVault has a number of software components, which when put together provides what is now called a Unified Security Management tool or USM in short. The components are:

  • Arpwatch, used for MAC address anomaly detection.
  • P0f, used for passive OS detection and OS change analysis.
  • PADS – Passive Asset Detection System, used for service anomaly detection.
  • OpenVAS, used for vulnerability assessment and for cross correlation of (Intrusion detection system (IDS) alerts vs. Vulnerability Scanner) information.
  • Snort, or Suricata used as an Intrusion detection system (IDS), and also used for cross correlation with Nessus.
  • Tcptrack, used for session data information which can grant useful information for attack correlation.
  • Ntop, for recording traffic patterns between hosts and host groups, and statistics on protocol usage. .
  • Nagios, used to monitor host and service availability information based on a host asset database.
  • OSSEC, a Host-based intrusion detection system (HIDS).
  • Munin, for traffic analysis and service watchdogging.
  • NFSen/NFDump, used to collect and analyze NetFlow information.
  • FProbe, used to generate NetFlow data from captured traffic.
  • AlienVault also includes lot of proprietary tools, the most important being a powerful correlation engine.

The combinations of all these tools have been seamlessly put together in AlienVault USM and is really a winner in the SME segment of the market. They have a nice feature set, and with the entire re-organization, additional funding, infusing new leadership etc. had made AlienVault a serious contender in the SIEM space. They are the sole contender in the Visionaries Quadrant in the 2014 Gartner Report. In short, it is like the UTM of SIEM technology. Now, is that good? Or is that bad?

Lets see!!!

What is good?

  • Flexible Deployment Architecture – This is where the Open Source roots really start to flex their muscles when it comes to AV USM.  The 3 main components of the Architecture are as follows:
    1. AV Sensor – AV Sensors perform Asset Discovery,
      Vulnerability Assessment, Threat Detection, and Behavioral Monitoring in addition to receiving raw data from event
      logs and helping in monitoring network traffic (including Flow). The sensors also perform Normalization of the received raw events and communicates them to the AV Server for correlation and reporting.
    2. AV Server –  AV Server is the Central management console that provides USM capabilities under a single GUI. The Server receives normalized data from the sensors, correlates and prioritizes the events and generates Security Alerts or Alarms. The server also provide a variety of reporting and dash-boarding capabilities as well.
    3. AV Logger –  AV Logger provides the capability to archive log files for purposes of forensic analysis and to meet compliance requirements for long term retention and management.

All the architecture components including the Sensor, the Logger, the Correlation Engine etc, can be deployed tier based, isolated or in a consolidated All-in-One style. This wide variety of deployment options help customers to have flexible and open architectures. This also in a way helps control cost depending on the budget at hand. Very rarely can products boast of such flexibility.

  • A Jack of All… – The best thing about AlienVault USM is being a “Jack of All” solution. They provide SIEM, HIDS/NIDS, FIM, NetFlow, Asset management, Vulnerability Management etc. under one USM platform. None of the commercial SIEM vendors like ArcSight, McAfee, etc. can boast of such diverse feature set. QRadar in my opinion is the closest to AV USM in terms of feature diversity. While all the features are formerly isolated Open Source community projects, the USM does a good job of integrating them in to a feature set. While they are not great as individual parts, they more than make up as a sum of the parts.
  • OTX – Open Threat Exchange is a wonderful community sharing platform that helps clients to share IP and URL reputation information so that all AV customers can benefit. This is true community sharing modeled on the likes of the Splunk Community (for app development). This has the potential to grow into a large source of Real World Intelligence and what AlienVault intends to do with this data remains to be seen. For now, it is being used by USM Correlation engine to provide better context and content for Security monitoring. AlienVault Labs, is also utilizing this infrastructure to constantly update Detection rules for malware vectors, vulnerability exploits etc. QRadar and ArcSight provide Intelligence, but it is commercial intelligence and not community intelligence. With community intelligence, you get more hits than misses.
  • Multi-Tenancy – While this feature may not elucidate an interest from many readers, those who have worked in an MSSP environment can understand why this is a very important feature to have. AV USM does support Multi-Tenancy out of the box. This, when combined with the Architecture flexibility provide great MSSP models to sell and operate. The key is to understand how the multi-tenancy works. Basically, a single database is used to store data of several customers using a Data isolation Logic and Permission control. The data isolation logic is based on Entities created in USM (Assets, Users, Components Assigned (Sensors) etc. are grouped together as a Single Entity) and  Permissions (applied in a granular fashion to data sets related to the Entities). QRadar, ArcSight and other major SIEM products provide this as well.
  • Price: One of the areas where AV USM benefits is Price. They are affordable while offering a whole lot of SIEM features. Mostly, this turns out to be the deciding factor for Small and Medium Enterprise segments. QRadar, ArcSight and Splunk are some of the most expensive SIEM products out there in the market and not everyone has the budge to buy them. In such cases, AV USM is a very cost effective alternative.
  • Customization: Again, this is one point where AlienVault outshines the competition in capability of customization. We have seen several customers who are using AV USM with heavy customization to perform threat detection, Asset Discovery, Threat scoring, APT detection etc. This flexibility is really desired by Security analysts and AV USM is making good on this promise.

What is bad?

  • But King of None… – As mentioned in the good, being a jack of all is well suited for certain organizations, but without a mature functionality and expertise in any of those areas is a strong negative. For example, the correlation engine is no where close to the likes of ArcSight , QRadar or Splunk etc. The threat Intelligence is not as good as QRadar, McAfee, RSA etc. And so on and so forth. So when it comes to critical functionality expertise, AV USM is found lacking.
  • Database: – AV USM is using MySQL for its database. All the issues related to a structured DB for log collection, storage and management come to haunt AV USM as well. All SIEM logs are stored in the MySQL database and this causes an issue in terms of scalability, especially with High log volume environments because backup and restore is time and CPU/RAM consuming. USM can hugely benefit from moving to a Non-DB Log storage architecture, thereby giving more flexibility in data management, but will AV take that route is doubtful. Based on their product direction, they are looking at Percona Server to replace MySQL. While it is a good move, it is still customized MySQL replacement, and may not add much desired scale to the product.
  • Product Stability: – The biggest issue, we have seen with the product is its poor stability. With way too many components, myriad integration, a ton of scripts, the product is really unstable. Every version upgrade is a nightmare. Re-installation or Re-start is the most common solution for the product to start working again. In a mission critical environment, this is a complete NO-NO.  One of the most common and frequently failing component is the DB. Issues like DB corruptions, Access issues, disk errors, unresponsive queries etc. really test the patience of end users on a regular basis. This in our opinion is the most damning negatives about AV USM.
  • Integration: – While AV USM is known for being customization friendly, the amount of Out-of-the-box plugins for Log Monitoring and Correlation is limited to the well known products. It does not have comprehensive integration capabilities with say legacy applications, Directory services, databases etc that other SIEM vendors boast of. Similarly, it relies mostly on its own “pre-packaged” tools for data enrichment and hence has poor “Third Party” Integration capabilities. However, if you really are a developer of open source products, the integration challenge can be overcome. But how many are willing in the real world enterprise?
  • Correlation & Workflow: – What good is a SIEM product if it cannot perform advanced Correlation and Operational workflow? AV USM has a strong foundation in Correlation using XML driven Directives and Alarms thresholds. However, when it comes Head-to-Head with the Industry leaders like ArcSight, QRadar, Splunk etc. it falls terribly short. We particularly like the Cyber Kill Chain flow which a lot of customers are using for complete visibility, but this is not the end game in real world enterprise operations where not always all the data points required for the directive is available. Same thing goes for the workflow, where the integration with external ticketing or issue tracking system is very limited and hence acts as a deterrent in large scale deployments.
  • Technical Support: – One of the common issues we hear about AV support is that it is of inconsistent and poor quality. Most of the times, the solutions rely on re-install or re-start or a bug-fix, because there are way too many components to troubleshoot and this leaves support to resort to re-install or re-start, without thorough root cause analysis.
  • Product Vision Stagnation: – This may not be much of an issue for potential users of AV USM, however it is important to note that the product has not gone through major leaps in the last 4 years. It had more than 3 major releases and 20+ minor releases, but nothing path breaking has been brought to the market. It has still remained in the “promising products to watch” for way too long. One of the main reasons we think is because of economies of scale. Since they are priced lower and cater to SME segment, the amount of money invested in development is less and hence the result.

Conclusion: 

In short, we we would like to conclude saying that AV USM is  definitely a great addition to organization who want cost effective, quick and easy SIEM solutions. However, it still has to go a long way in competing with the big guns out there for it lacks both in firepower as well as range. So what do you think about AlienVault? Feel free to post your comments below.

Until next time… CIAO!!!

7 thoughts on “AlienVault SIEM – Playing with the big boys!!!”

  1. Thanks for this analysis.
    I appreciate your article and your fair opinion on each product.
    Next step should be LSK :-p
    And why not an article based on use-cases to detect malware and beaconing?

      1. Alienvault is a good solution if you are looking at cost effectiveness and all-round capabilities. However, if you want extensive use cases, vendor parsing support, enterprise scalability, you should consider other SIEM products.

  2. It would have been nice if Alien vault USMusers provide me more details regarding the log aggregation feature…Does compression of indexed data occurs or not?

  3. SSE … this is what’s in their deployment guide….so yes they are using MySQL
    On the AlienVault MySQL Setup menu, in the Enter MySQL Server IP address field, type the
    IP address of the USM Enterprise Database; press Enter ().

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.